subscription box

Craftiosity – Marbled Candle Holder

I haven’t done any marbling for a little while so I was quite excited about the Craftiosity marbled candle holder kit! I thought it was a really clever idea to add a unique design to a something that would make a great centrepiece for a table or mantelpiece.

Included in the kit was:

  • Wooden candle holder
  • White acrylic paint
  • Paint brush
  • Marbling tray
  • Marbling inks x2 (black and blue)
  • Disposable gloves

The first step was to paint the candle holder with the white acrylic paint to act as a base for the ink and also to be the third colour of the marbling pattern. The actual making time for this project is actually quite quick but there is quite a bit of drying time involved too. The instructions said that the paint would be dry after 30 minutes, but I actually left mine overnight because I had other jobs to get on with, which made it quite a good project to fit in between other things. I was also painting another project at the same time (see my next blog post!) so it was quite good to have this to alternate with!

Once the paint was dry it was time to get marbling. Using the marbling tray filled two thirds with water you could create your design using drops of the inks. I actually added some extra drops after I swirled my inks with the end of the paint brush but I think I used too much in the end because my finished candle holder took a very long time to dry. Restraint is definitely key here and I think it would still have made a nice pattern, I was just a bit over enthusiastic!

After dunking both sides into the marble pattern on the surface of the water and making sure that all the sides of the candle holder were covered and that it didn’t touch the bottom of the tray, all that was left to do was to let it dry. As I mentioned, mine took a little while to dry completely, but now it is done it looks great. I love with marbling that you never quite get the same design twice so every piece is completely unique. 

I also liked the suggestion of using the inks to marble some paper as well and experimenting with different patterns. It’s always nice to have ideas of what to do with the leftover supplies from craft kits. Now I just need to buy some candles to go in my nice new holder! 

craft kit

Inner Canvas – Abstractus

As you probably know I am currently subscribed to quite a few monthly craft boxes and have been considering cancelling some and swapping them for others to make sure I’m trying out a variety of things and not just getting stuck in a rut. It’s hard to cancel any of them though as I’m always excited to see what will come next and I do feel as though I’m sampling a good range of crafts. However, on the hunt for new craft subscription boxes I came across Inner Canvas. I had a look at the website and scrolled through the past boxes to see what kinds of things were included. Most of the crafts I had tried before, but the designs looked unique and the kits looked well curated. The thing that made me do a happy dance was that you could buy past kits on a one off basis! I love it when subscription box services do this as it means you can dip in and out of the kits without committing to a full subscription, which comes with the danger of receiving crafts you aren’t that interested in. I have several boxes stacked up down in my studio that I haven’t got around to making because I’m just not that excited about the contents.

I was attracted to Inner Canvas via Instagram where Nadia, the lady who runs the show, was posting about their latest box, an embroidery entitled ‘Abstractus’. The design is inspired by geodes and features embellishments of Czech glass beads and Aventurine beads – a semi-precious gemstone.  

Included in the kit was:

  • Embroidery hoop
  • Aventurine gemstones
  • Czech glass beads
  • Calico fabric
  • Embroidery thread
  • Embroidery needle
  • Beading needle
  • Carbon paper
  • Paper template
  • Metal keyring blank
  • Metal hook (for hanging embroidery)
  • Care package (tealights and a tea bag)

Also included was a ‘Therapist Approved’ journal that included some self-reflective exercises to help reduce anxiety and improve the mindfulness associated with crafting and creativity. I haven’t had a chance to complete any of the exercises yet (to be honest I find crafting mindful enough), but they do look good and a journal is included with every kit.

The instructions that came with the kit were quite basic, just a paper template for transferring the design over to the fabric using the carbon paper and a photograph of the finished piece with a key to show which stitch and colour embroidery thread, or beads should go in which section. The photograph was really clear and easy to use. More detailed instructions were provided via a video link sent in an email. I was really impressed with the video, the steps were demonstrated well and the voiceover was well-paced and easy to understand. Although I already know how to do the two stitches I thought the step-by-step instructions showed how to do them both clearly, especially the two options for getting the satin stitch to go round a curve, which is sometimes tricky for beginners to get to grips with. 

There was a second instructional video for the bonus keyring project that was just as well created as the main video. The keyring was made first so you could ensure you would have enough fabric for both projects and it was nice to have a practice go at the satin stitch and attaching the beads before moving onto the main one.

I thought the design of the embroidery was really unique and I liked how you could really feel where the inspiration came from. I was also impressed at how what is a fairly simple design using only two stitches and the addition of the beads can have such an impact as a finished piece. It just goes to show that less definitely can be more!

I thoroughly enjoyed this craft kit and am keen to see what projects Inner Canvas bring out in the future. I will definitely be keeping an eye on their Instagram feed and will be ordering any kits that look exciting. I have already ordered another of their past kits, the Abstract Air Dry Clay Ceramic kit. I’m hoping to get the chance to have a play around with that one very soon as it’s been a while since I did any clay work and I’m hoping that I will enjoy it as much as I have enjoyed this one.

subscription box

Craft Box Club – Macrame Semilunar

Quite a quick craft this week from Craft Box Club – a macrame semilunar with a bonus keyring project. I’m really glad I’ve done some macrame recently, especially learning the double half hitch which made up the main body of this project!

Included in the box was:

  • Macrame twine – white
  • Macrame twine – forest green
  • Wooden dowel
  • Macrame comb
  • Keyring clip

The instructions say you will also need scissors but you will need a length of string as well to hang the dowel from. The instruction video for this one is great. All the knots are shown slowly and repeated so that you can see them clearly. I paused and rewound the video several times to make sure I was doing it correctly. I think for this project the video was definitely better than the pictures, although the pictures were still useful. With macrame I much prefer to see the knot being created, rather than just a picture or description. It helps me to understand the structure of the knot a lot better.

Both the projects were really quick to complete. The semilunar was much smaller than I thought it was going to be from the pictures I had seen prior to receiving the kit, but I think that was a good thing because it wasn’t too repetitive and I quite enjoyed making something fairly small for a change! 

I thought the addition of the keyring was great too. It was a good chance to use a couple more different knots; a square knot and a gathering knot. There was a separate instructional video for this project and again was clear and slow enough that you could craft along with it.

Although it’s nice to get involved in a longer project I do enjoy completing something a little quicker every now and then. It gives a nice sense of achievement and satisfaction for only a couple of hours of work.

subscription box

Makerly – Mandala Dotting

Over the last couple of weeks I’ve been slowly working my way through the mandala dotting Makerly box from last month. This craft trend seems to have completely taken off recently and it seems like a lot of people are doing it at the moment. It certainly has quite a mindful quality to it, whilst at the same time requiring concentration and precision. 

Included in the kit was:

  • Dotting tools
  • Paints
  • Paintbrush
  • Stencils
  • White pencil
  • Black card
  • Round mandala canvases
  • Plastic stand
  • Self-adhesive acrylic gems
  • Rock

The first step was to try out all the different sized dotting tools and have a play around with positioning the dots to create patterns. I much preferred the ball shaped metal tools to the flat plastic ones. I found the flat ones left a texture on the dot, whereas the ball ones gave a much smoother, more precise dot.

There were several stencils included in the kit of varying sizes and spacing which were very helpful for creating even patterns. For my first test pattern I drew lines in the template but I then found that the lines were still visible as I didn’t completely cover them with my dots and they didn’t rub out nicely, so for my next designs I just made dots at each of the intersections. For my second design I ‘dotted’ but then joined the dots with a pattern I copied from the instructions as I knew that if I didn’t have the lines I would make a mistake.

In a typically ‘me’ fashion my first design actually turned out to be my best! Although I did like the design I ended up with on my mandala canvas, especially the limited colour scheme, I managed to go a bit wonky which kind of spoils the effect of the whole piece. 

Lastly I painted my rock. This seems to be the biggest craft trend at the moment, but now I have a painted rock I’m not really sure what to do with it! I started by painting a black circle on the rock and then once it was dry I did my dotting. I kept it quite simple as it’s a lot smaller than the card or canvas and kept to a limited colour palette as well. 

I’m not sure if this craft is for me, but I’m really glad that I had a go at it. I will definitely be using the basic principles of mandala creation for my future embroidery projects and I think the tools will come in handy for other projects too.

subscription box

Craftpod – Mimosa Embroidery

Another lovely kit from Craftpod for Spring, this time inspired by the Mimosa tree with it’s fluffy yellow flowers. There were two projects in the kit; an embroidered needle book, and a greenfinch cross stitch.

Included in the box was:

  • Pre-printed fabric
  • Felt (green and cream)
  • Cross stitch canvas
  • Embroidery hoop
  • Embroidery thread x6 (dark green, light green, yellow, grey green, pink, and black)
  • Pins
  • Needles
  • Button
  • Cardboard bobbins
  • Stickers
  • Tea bag

I started off with the needle book as I have never made one before. I thought it looked quite complicated but it was actually surprisingly easy to make! Starting off with the pre-printed fabric in the hoop I followed the design using mainly one strand of thread for back stitch and split stitch for the stems and leaves and French knots to create the little flowers. Once the embroidery was finished I cut around the border to create a little rectangular patch. I then cut the rest of the white fabric away from the green and trimmed the cream felt to size so I had all the pieces ready to start construction.

Stitching the embroidered patch onto the green rectangle I was a bit worried that the fabric would fray too much, but as I sewed around it I felt like the stitches would keep it in place and the raw edges give it quite a nice rustic feel. Adding the button finished off the front of the book nicely.

To keep the book shut you had to finger knit a crochet chain. I couldn’t quite remember how to do this from my previous crocheting attempts so I used the video tutorial on the Craftpod YouTube channel to remind myself. The video was really demonstrative and I picked it up straight away. The only thing I found was that they didn’t show how to cast off to keep your chain secure, but it wasn’t too hard to figure out! This chain was sewn to the back of the book, allowing enough give to go around the button once the book was shut with all the felt layers inside.

After sewing the green felt to the cream with some back stitch down the middle to create the ‘pages’ of the needle book, the cream felt was then attached to the completed cover using blanket stitch. As the edges of the green fabric had also been left raw this added to the rustic aesthetic of the book.

The second project was the cross stitch of the greenfinch sitting on a Mimosa branch. I love all the colours in this embroidery, it’s so bright and Spring-like. I thought it was going to take me a really long time as cross stitches usually do, but it was actually quite quick. The design is fairly small and the stitch chart was very easy to follow. I also liked the use of a French knot for the eye, rather than just another cross stitch, it seems to bring the design to life.

Another very enjoyable box from Craftpod. I liked that neither of the projects were too time consuming, and they were both things that could be put down and picked up at leisure, there was no need to dedicate hours to them all in one go. I particularly liked the needle book, although it’s not really my usual style it will actually be really useful and I will definitely be filling it up and putting it in my sewing box.

subscription box

Craft Box Club – Needle Punch Tote Bag

It’s been a little while since I did a punch needle project so I was quite looking forward to the latest Craft Box Club, embellishing a jute shopping bag with a Spring-themed motif. 

Included in the box was:

  • Jute shopping bag
  • Green yarn
  • Yellow yarn
  • Punch needle
  • Chalk
  • Paper template

Also included was the link to the ‘how to’ guide on the website. As well as the video tutorial they have also started to include a basic step-by-step photo guide for how to complete the project. I find this really useful, especially when I already know how to do the craft technique. However, the video for this project was quite short and worth a watch as the technique was slightly different to normal due to the lack of embroidery hoop to keep the fabric taut. The first stage was to cut out the paper template of the cheese plant leaf and draw round it onto the bag using the chalk.

Then all that was left to do was punch! I did the outline of the leaf and some veins in the middle and then free styled some daffodils around the edge. The instructions said to do five, but that upset my sense of symmetry a bit so I decided to stick to four, one in each corner! Once all the punch needling was complete I ironed it on the back which apparently helps to relax the fibres to keep the design in place.

Although I liked the project in principal (I always like making useful things and being eco-friendly) I did find the execution of it a little bit problematic along the way. I found the jute material very difficult to punch through and without a hoop to keep the fabric taut I found that several of my stitches fell out after I was too far past them to unpick all the way back to redo them. I also thought that the yarn was a bit too thin for this project. It kept falling out of my needle, which was a little tricky as I needed one hand to hold the needle and the other on the reverse side of the fabric pulling the stitches through. If the yarn had been a bit chunkier I feel that the stitches would have stayed in place better. The problem with only doing a single line of stitches is that usually with a larger area of punch needle the stitches on either side will help to hold the whole design in place. Without any neighbouring stitches the design felt a little precarious. I will be interested to see how long the design lasts once I have used the bag a few times.

Nevertheless, it was good to try a different technique of a craft I am already familiar with. I’m always keen to expand my skill set and try new things. And I love the Spring-like feel of the design, it makes me feel joyful and ready for the new season!

subscription box

Craftiosity – Embroidered Moon Tea Towel

Back to embroidery for me this week with the moon tea towel from Craftiosity. I really like the idea behind the design of this embroidery of the waxing moon representing a period of building energy and achieving goals. Nice to have a reminder of this in the kitchen whilst I’m doing the washing up!

Included in the kit was:

  • Embroidery hoop
  • Cotton tea towel
  • Embroidery thread x4 (dark grey, mid blue, light blue, dusky pink)
  • Needle
  • Paper template
  • Inspirational postcards

The template was used to trace the design lightly onto the tea towel using a pencil and a dotted line rather than a solid line for the clouds as they wouldn’t be filled in completely. The instructions said to only trace the clouds first and then put the outline of the moon and foliage in later, but I doubted my ability to line up the pattern again so I just traced it all at once!

I really liked the use of the different stitches and coloured thread to fill the clouds. It was quite repetitive doing the seed stitch, cross stitch and French knots, but in a mindful and meditative way. I tied off the thread after doing each little grey star as I didn’t want to waste the thread and I didn’t want the stitches on the back to show through to the front. 

The moon was stitched in satin stitch using all six strands of the thread and the leaves were meant to be the same, but I felt as though I didn’t have enough left to complete them so I changed to only using three strands for the leaves. As the area of the leaves was a lot smaller than the moon it didn’t really make a difference to the overall look. 

I’m looking forward to using this and having it hanging in my kitchen, inspiring me to grow and work towards me goals!

subscription box

Makerly – Soap and Sugar Scrub

I always think that soap making will be complicated even though I’ve done it before, but it’s actually so easy as this month’s Makerly box has proved to me once again! The kit was to make mini soaps and sugar scrubs flavoured with lavender and Chai tea.

Included in the kit was:

  • Melt and pour soap base
  • Coconut oil
  • White sugar
  • Brown sugar
  • Lavender
  • Chai teabags
  • Lavender essential oil
  • Plastic moulds
  • Gift tags
  • String

I made the soap first, melting it in the microwave in short bursts until it was completely runny. I actually had to reheat it because I had trouble taking the lid off the essential oil and it started to congeal! The instructions did say to work fast and I should have prepped everything in advance, but it did take me by surprise just how quickly it started to set. I used the lavender oil and flowers for the first batch of soap and the Chai tea for the second batch. I was expecting it to fill all the moulds as shown in the picture, but mine mixture didn’t quite stretch that far.

Conversely there was so much sugar scrub mixture that I had to set it in several batches! I made up the mixture whilst the soap was setting in the fridge, which only took about 15 minutes. I melted the coconut oil in the microwave and mixed it with both sugars along with the lavender for the first batch and the tea for the second batch. This took me longer than I expected. There was so much of each mixture that in total I filled, set, and emptied the moulds three times!

The soap base and coconut oil came in tins which could then be repurposed as gift boxes for the bath time treats, using the gift tags and string to label them. The sugar scrubs definitely need to be stored in a cool place as the coconut oil does have a tendency to melt if it gets too warm. I left some of them in front of a window whilst I was waiting for the others to set and the sun coming through caused them to start to losing their shape and disintegrate a bit, so take care with your sugar scrub storage!

Although I am more drawn towards textile and embroidery based crafts it is always fun to do something a little different for a change. One thing I’ve found about the Makerly craft subscription is that the projects nearly always push me to try something new that is out of my crafting comfort zone, so whilst producing soap and sugar scrubs may not become something I will make a regular habit of I enjoyed my morning dabbling in toiletries!

subscription box

MakeBox – Beatrix Bunny Doll

I’ve been really looking forward to this month’s MakeBox (https://www.makebox.co/), the Beatrix Bunny Doll, not only because I love sewing but also because it has an Easter feel to it and I love this time of year! I love all the egg, chick and bunny themed craft projects, along with that feeling of Spring in the air and the sense of hope and positivity it brings, especially this year. I was particularly interested in this box because, whilst I love sewing, it is always nice to have a go at a different kind of sewing aside from embroidery for a change. I did make the Sugar Plum Fairy heirloom style doll from MakeBox a couple of Christmases ago (see my blog on it here) and this was very similar in style.

Included in the box was:

  • Cream poly cotton
  • Vintage floral linen
  • Pink linen
  • Embroidery threads (black and pink)
  • Sewing thread
  • Stuffing
  • Elastic
  • Needles
  • Pins

Before receiving the kit, MakeBox emailed the subscribers with a choice of box, Beatrix Bunny (which I chose) or Bobby Bunny. Each came with a different vintage fabric to make the ears and outfit. The shirt style was different for each of them as well. Since sending out the subscription boxes MakeBox have also introduced Betsy Bunny who is available to buy in their online shop. I actually think I might have chosen Betsy if she had been included in the original choice! 

The first step was to cut out all the pattern pieces from paper and draw them onto the fabric. For some of the pieces it was important to remember to flip them over to make an opposite; to create a left and a right ear for example. The vintage fabric was also quite limited to so you had to lay out the pattern pieces carefully, ensuring that you still had a good seam allowance around each piece.

The sewing began with the head, which was definitely the most complicated part. The instructions said you could either hand sew or machine sew. I thought machine sewing would be quicker but sheer laziness stopped me from getting my sewing machine out (!) so I decided to hand sew it and actually, I’m glad I did. Machine sewing would have been a lot faster for parts of it, but there were some parts that were at such an awkward angle and had so many pins in to keep it in place that I definitely would have struggled with the machine. 

Making the head felt a lot like piecing a jigsaw puzzle together, but after constructing it all and adding the eyes and nose with the embroidery thread I felt really proud of myself!

Moving on to the body was a lot more straightforward. The arms and legs were easy to sew around, although they took me a little while to turn out. I used a pencil to help push the stuffing down to make sure they were well filled. Attaching the arms and legs to the body was a little tricky but only because the limbs made it bulky to sew. The instructions were a little vague in places, like saying to pin the body into place but not actually saying to sew it, however the step-by-step photographs were pretty clear to follow. Once the bottom floral piece had been sewn on the bunny could then be stuffed. I used rice to stuff the bottom so that she sits up nicely. The instructions also suggest lentils could be used as an alternative. The rest of the body was stuffed with toy stuffing like the limbs and head.

Sewing the body to the head was by far the most difficult part. You had to do a whip stitch with the seam allowance tucked inside, add to this the difficult angle and my neckline ended up looking a bit messy. I actually unpicked my first attempt and started again as it was so bad! My second attempt was a little better but still not my finest sewing!

Lastly it was time to make the clothes. This was the part I was most looking forward to. The bloomers were cut out of the pink linen, hemmed and sewn together before sewing elastic into the waistband and legs. The pinafore top was slightly more complicated and I’m glad I measured it around the body before sewing up the seam allowances because it was a very tight fit so I adjusted it to have less seam allowance, but still have a tidy finish. The flounces were fun to do, although my thumb was glad when they were done after pushing the needle through so many layers of material! I decided to alter the way the straps were attached to the top. In the instructions they are attached to the top of the blouse and just tied around the neck, but I thought this looked a bit messy, so I attached them to the side of the neckline and then sewed them in place to the back of the blouse like proper straps. It means my messy head attachment is more visible, but I think it gives it a more finished look overall.

I’m very proud of my finished Beatrix Bunny. She was quite a labour intensive project and took me a long time to complete, but the end result is a lovely toy. Now I just have to decide whether to keep her or give her away!

subscription box

Craftiosity – Beaded Hanging Shelf

The project in this month’s Craftiosity kit (https://craftiosity.co.uk/) was a beaded hanging shelf. When I first got it out of the box I thought it looked quite complicated, but it actually turned out to be super easy and quick to make. I often struggle to find places to hang things like this in my house, but this one is so small and light that I was able to hang it off the end of my bookshelf!

Included in the kit was:

  • Copper ring
  • Cotton yarn
  • Small wooden beads x9
  • Medium wooden beads x17
  • Large wooden beads x5
  • Needle
  • Palm leaf tray

The first part of the project used some macrame knots. The first was a lark’s head knot to attach the lengths of yarn onto the copper ring. This is quite a simple knot and I thought the instructions were easy to follow. However, I had some difficulty with the second knot. This one was a gathering knot, which I have done before, but I found the first couple of instructions very confusing. It said to cut a 15cm length of yarn and then fold the first 6cm over and back on itself to create a loop. Doing this left me with a very short tail and the yarn in the picture was hidden by a hand, so I watched the video guide to try and figure out what I was doing wrong. The voiceover in the video said 15cm too, but the yarn looked much longer than that to me, so I decided to cut a longer length and try again. I cut a piece around 40cm long and this time I had enough to create the loop with a long enough tail to wrap around and achieve a gathering knot that looked a similar length to the picture. I’m not sure if maybe they meant 15 inches, but I don’t know why they would have changed from metric to imperial half way through…I figured it out in the end anyway! 

From there down the rest of the project was very straightforward and the instructions were easy to follow. It was mainly threading beads and tying knots to keep them at the right height. I liked the way the beads were spaced to support the tray and keep it in place. As it’s quite small it wouldn’t take a lot of weight but it would be perfect for a small plant or other little ornament. 

I also like the suggestions for personalising it by painting the beads or using a natural dye like avocado to dye both the yarn and the beads. Personally I like the natural colours of the beads and yarn, but you could definitely get experimental with this project!